Public Drinking Water Branch
Water Protection Program
P.O. Box 176
Jefferson City, MO 65101-0176
United States
Water Protection Program
fact sheetDivision of Environmental Quality
Director: Kyra MooreService lines are the pipes that connect a building's plumbing to a public drinking water system, carrying water from the water main to the home or building. Even though the federal government banned using leaded pipe and solder in new plumbing systems built after 1986, lead pipes can still be found in older cities. The lead ban for Missouri became effective Jan. 1, 1989. Old lead service lines can be made of pure lead, or connected with lead solder (wipe joint).
The service line to your building or home could be made of plastic, copper, PEX, HDPE, galvanized steel, lead or a combination of materials. To determine what your service line is made of, grab a refrigerator magnet and a key or coin, and follow the steps below. If you cannot locate your water meter or service line, or it is unclear which category applies to the pipe, you can call your public water system for assistance.
Buildings or homes on public water systems have a water meter, which could be located either inside or outside of the structure. The actual water meter will have a dial that reads "gallons." If it reads "cubic feet" or "kilowatt hours," that is either a natural gas or electric meter.
The service line should be a .75-inch to 1-inch pipe coming from either underground or through the foundation floor or wall, with an attached shutoff valve that looks something similar to the (Fig. 1) photo. Focus on the section of pipe where the service line enters the building. Is that section of pipe made of plastic or metal?
If the pipe is plastic, that is good. It indicates that your service line may not be made of lead.
Plastic pipes may be many colors: white, blue or black are common (Fig. 2). Most people are familiar with plastic and can easily identify it. Although the service line entering your home or building is plastic, there may be connectors or repairs made of lead that are not visible.
If the pipe is metal, it could be copper, galvanized steel or lead. You can narrow down which metal with a few more tests.
What Color is the Pipe?
Using the key or coin, scratch the metal pipe close to where it enters the house through the wall. What color is the pipe?
Copper pipe is orange-brown and shiny like a new penny when scratched. Old copper may be weathered and have a green tint, or it may be painted. This is why you may need to scratch the copper pipe.
Is the Silver or Gray Pipe Magnetic?
On the same section of pipe, touch the refrigerator magnet to the metal pipe. Does the magnet stick?
Galvanized steel pipe is not great. If there are lead connectors or lead service lines upstream of galvanized service lines, lead leached from them can flow downstream and collect on the galvanized coating. Galvanized steel pipes can periodically release this lead, even after the lead piping is removed. Galvanized pipe has theaded fittings (Fig 4). A magnet will stick to a galvanized steel pipe.
If the pipe is silver/ gray and not magnetic, was it hard or soft when you scratched it?
If the pipe has a wipe joint — looks like a snake that has eaten something (Fig 5) — the pipe is made of lead.
To confirm, call your water utility. If it is lead, here is what you can do:
To help you identify your service line material, print out a copy of the department's How to Identify Your Service Line Material flyer, which has color photos of scratch tests on metal pipe.
*All credited photos are from the Missouri Department of Natural Resources, in cooperation with Missouri American Water Co.
Nothing in this document may be used to implement any enforcement action or levy any penalty unless promulgated by rule under chapter 536 or authorized by statute.
Water Protection Program
P.O. Box 176
Jefferson City, MO 65101-0176
United States